EPON 1GE ONU ZTE Chipset

Overview

EPON ONU is one of the EPON optical network unit designs that meet the requirements of broadband access networks. It is used in FTTH / FTTO for data and video services based on EPON networks.EPON is the latest generation of access network technology.Based on ZTE's high-performance EPON access chipset. Provide 1 GE adaptive Ethernet port. Support bridge and routing mode，These features feature high-performance forwarding to ensure an excellent Internet and HD video service experience. As a result, it provides the perfect terminal solution and future-proof service support for FTTH deployment. Good third-party compatibility when used with third-party OLTs such as Huawei/ZTE/ Fiberhome/BDCOM OLT.

Features

n Full compatible with IEEE802.3ah 

n Support port-based rate limitation and bandwidth control;

n In compliant with IEEE802.3ah Standard

n Up to 20KM transmission Distance

n Support data encryption, group broadcasting, port Vlan separation , etc.

n Support Dynamic Bandwidth Allocation (DBA)

n Support ONU auto-discovery/Link detection/remote upgrade of software;

n Support VLAN division and user separation to avoid broadcast storm;

n Support power-off alarm function ,easy for link problem detection

n Support broadcasting storm resistance function

n Support port isolation between different ports

n Support three layer routing functions

n Support ACL and SNMP to configure data packet filter flexibly

n Specialized design for system breakdown prevention to maintain stable system

n Support software online upgrading

Product interface and LED definitions

Indicator			Description
1	PWR	Power status	On: The ONT is power on; Off: The ONT is Power off;
2	PON	ONU Register	On: Success to register to OLT; Blinking: In process of registering to OLT; Off: In process of registering to OLT;
3	ALARM	EPON optical signals	Blinking: Optical power lower than receiver sensitivity ; Off: Optical in normal
4	LAN	LAN port status	On: Ethernet connection is normal; Blinking: Data is being transmitted through the Ethernet port; Off: Ethernet connection is not set up;

Specification

Technical item	1GE EPON ONU
Chipset	ZTE
PON interface	1 EPON port (PX20+) Wavelength:Tx1310nm,Rx 1490nm SC/UPC connector Receiving saturation:≥-8dBm Receiving sensitivity: ≤-30dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface	1*10/100/1000M Full/Half, RJ45 connector
Operating condition	Temperature: -30℃～+70℃ Humidity: 10%～90%（non-condensing）
Storing condition	Temperature : -30℃～+70℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/0.5A
Power consumption	≤4W
Dimension	110mm(L) x100mm(W) x23mm (H)
Net weight	0.2

Software Parameters

 

Network Construction

Ordering information