EPON 1GE ONU ZTE chipset

Overview

1GE EPON ONU is one of the EPON optical network unit designs that meet the requirements of broadband access networks. It is used in FTTH / FTTO for data and video services based on EPON networks.EPON is the latest generation of access network technology.Based on ZTE's high-performance EPON access chipset. Provide 1 GE adaptive Ethernet port. Support bridge and routing mode，These features feature high-performance forwarding to ensure an excellent Internet and HD video service experience. As a result, it provides the perfect terminal solution and future-proof service support for FTTH deployment. Good third-party compatibility when used with third-party OLTs such as Huawei/ZTE/ Fiberhome/BDCOM OLT.

Features

n Full compatible with IEEE802.3ah 

n Support port-based rate limitation and bandwidth control;

n In compliant with IEEE802.3ah Standard

n Up to 20KM transmission Distance

n Support data encryption, group broadcasting, port Vlan separation , etc.

n Support Dynamic Bandwidth Allocation (DBA)

n Support ONU auto-discovery/Link detection/remote upgrade of software;

n Support VLAN division and user separation to avoid broadcast storm;

n Support power-off alarm function ,easy for link problem detection

n Support broadcasting storm resistance function

n Support port isolation between different ports

n Support three layer routing functions

n Support ACL and SNMP to configure data packet filter flexibly

n Specialized design for system breakdown prevention to maintain stable system

n Support software online upgrading

Product interface and LED definitions

 

 

Indicator			Description
1	PWR	Power status	On: The ONT is power on; Off: The ONT is Power off;
2	PON	ONU Register	On: Success to register to OLT; Blinking: In process of registering to OLT; Off: In process of registering to OLT;
3	ALARM	EPON optical signals	Blinking: Optical power lower than receiver sensitivity ; Off: Optical in normal
4	LAN	LAN port status	On: Ethernet connection is normal; Blinking: Data is being transmitted through the Ethernet port; Off: Ethernet connection is not set up;

Specification

Technical item	1GE EPON ONU
Chipset	ZTE
PON interface	1 EPON port (PX20+) Wavelength:Tx1310nm,Rx 1490nm SC/UPC connector Receiving saturation:≥-8dBm Receiving sensitivity: ≤-30dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface	1*10/100/1000M Full/Half, RJ45 connector
Operating condition	Temperature: -30℃～+70℃ Humidity: 10%～90%（non-condensing）
Storing condition	Temperature : -30℃～+70℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/0.5A
Power consumption	≤4W
Dimension	80mm(L) x80mm(W) x22mm (H)
Net weight	0.1

Software Parameters

 

Network Construction

Ordering information